• Skip to main content
  • Skip to secondary navigation
  • Skip to primary sidebar
  • Skip to footer

Comics for Beginners

How to Write & Draw Comics

  • Contact
  • About
  • Faqs
  • Log In
  • Resources
  • Podcasts
  • Comics Crash Course
  • Blog
  • Videos

sketching

Step-by-Step Guide: My Comics Process

by Palle Schmidt 6 Comments

This is my next graphic novel project! Filling in the blanks should be no biggie, right? Well, there’s a little more to it than that.

I recently posted this picture on Instagram and Facebook that got a lot of likes – and a lot of questions! So I thought I’d elaborate a bit on how I actually tackle the creation of a comic or graphic novel. I go into detail with certain elements in my premium 10-video tutorial series, but these are the basic steps I go through every time.

1: Script

Having a finished script before you start drawing increases your chance of actually finishing with about 3000 percent. The first 2 videos of the premium series covers this (and those episodes are free). Sometimes I’ll get a script from another writer but I often work off my own or have to break the story down into pages.

2: Thumbnails

This is little scribbles just to get a grip of the page breakdowns. I don’t neccesarily do it for every page but it can be very helpful. The more I plan before I start drawing, the more smoothly the rest of the process. There is a podcast episode about making those hard choices here.

3: Rough sketches

Once I know sort of what the layout of the page will look like, I can start rough sketching pictures. As you’ll notice, this is bare bones storytelling, just enough for others to make out what is going on. No more, no less. I usually sketch on half pages, not full size. No need for bigger format when I’m not doing details – in fact the smaller format often helps in creating a clear layout.

4: Borders and lettering

After scanning my rough sketches, I put them in an InDesign document. If it’s an issue of a comic, I’ll make seperate 22-page files that stick to the same template. I’ll start by creating a standard border for the entire project and just plunk that in between all the frames. Then I’ll put the lettering in where it needs to go. Please note, that this is not the final document! I can adjust the lettering once I have the finished art. For full breakdown of this process go here.

5: Borders and balloons

Using a print-out of my now lettered rough sketches, I am ready to draw the actual pages. BUT, since I might need my borders and speech balloons in a clean format, I do the boring work of inking that part first. This is what the image I posted on Instagram portrayed – I can see why there was some confusion as to how I actually worked!

After I’ve traced the borders and balloons on the board I intend to do the rest of the artwork on, I scan the whole thing. Why? I’ll explain in step #8.

6: Sketching

Using my rough sketches as a guide, I’ll sketch the pages going into more detail, especially on backgrounds and stuff. A picture might change from my original ideas, but I always stick within the frames I already decided on. There’s a video of that process here.

7: Inking

Using a lightbox I trace my skectched pages on the boards that already has the borders and balloons. I can adjust the images a bit if needed. Sometimes I do painted art and other times I ink with black markers. There’s a video of me inking a page of Thomas Alsop here.

I don’t need to worry about paiting outside the borders in this stage because I’ve already scanned the clean pages with just balloons and borders, and no art.

8: Scanning and clean-up.

Remember when I said I might need the borders clean? This is the step. I used to I scan my inked pages and clean up mistakes where I painted outside the frames or over speech balloons. Now I just use the already scanned borders. I just smack my clean borders over the finished art in Photoshop, turn the opacity down a bit so I can see what I’m doing and adjust the corners. It took me a while to figure this out, because sometimes a scanner will skew things a little bit. But I discovered that if I do a “free transform” and focus on the four outer corners of the borders, the rest will sort itself out.

Once the two layers match up, I’ll select all the white within the frames on the top layer and delete that. Then I turn the opacity of the layer back up to 100% and viola! I now have a layer with nice, clean borders and balloons on top, and whatever mistakes (painting outside the borders) I made are hidden underneath. I flatten the file and export it, usually as a high-res tiff file.

8.1: Coloring (optional)

I’m not gonna go into detail here, but you might want to check out this post on coloring in Photoshop.

9: Repeal and replace!

Admitted, I don’t really call it that. But I do have to go through my already lettered InDesign file and delete all the border blocks and replace my rough sketch with the finished art. Some adjusting to the lettering is usually neccesary but then I have the entire book or issue ready to send to the graphic designer or export as a PDF directly for print.

10: Celebrate

I usually skip this step, honestly. But having typed up this post and seeing how much work goes into creating a graphic novel, I feel like I should make a point of this going forward.

Hopefully this answered some of your questions and gave you a few ideas to implement in your own process. Please share this post if you found it helpful!

 

 

Filed Under: Pro Tips Tagged With: A. J. Kazinski, art hacks, Art Tutorial, balloons, borders, comics, creativity, graphic novel, how to, inking, making comics, mistakes, painting, Photoshop, planning, pro tips, process, sketching, speech balloons, storytelling, Thomas Alsop, tips for making comics, workflow

Why daily sketching doesn’t work

by Palle Schmidt 11 Comments

Woodsman_COLORYou know how important it is to draw every day, if you want to improve as an artist. But more importantly, you need to keep a forward momentum and draw the hard stuff.

A lot of artists share daily sketches on Twitter and Facebook. While that’s a perfectly valid thing to do, I see one common problem with most of these sketches – they are all very good! The problem here is that the artist has sat down with a blank piece of paper and drew whatever he felt like, whatever image he had in his mind.

Let’s imagine you were to do the same. Wonder what image would pop up?

I’ll take a wild guess: Character shot.

Whether it’s a macho superhero, a funny animal or a sexy robot, the problem with that image is exactly that it came from inside your head. And let’s face it: not much new comes from inside your head.

I used to only draw muscular guys with swords and dragons. While I did get slightly better at drawing guys with swords and dragons, this daily exercise didn’t help me get better at drawing. Not by a long shot.

What DID make me better, was being forced to draw stuff I didn’t already know how to draw, the “boring” stuff like flowers in a vase, and the hard stuff, like a street full of houses and cars and trees and people .

Unless you push yourself and draw from life, study and copy from photo reference and other artwork, you’ll only be maintaining your drawing muscle, not improving it. When it’s really hard and frustrating – THAT’S when you’re on your way to getting better.

Imagination is overrated. You need input to produce output – even original, fresh and innovative output!

Sketching daily only works if you push yourself to draw the stuff you can’t.

Filed Under: Pro Tips Tagged With: character shots, creativity, daily sketching, drawing, improving as an artist, learning, mistakes, reference, sketching, workflow

Bonus Vid – Sketching a page of Thomas Alsop

by Palle Schmidt Leave a Comment

Another look into the my process as I sketch a page of Thomas Alsop (out now from BOOM! Studios).

For more on Thomas Alsop go to http://thomasalsop.com/.

Filed Under: Pro Tips, Video Tagged With: art hacks, artwork, Chris Miskiewicz, collaboration, comics, creativity, drawing, how to, making comics, mind hacks, mistakes, Palle Schmidt, planning, productivity, sketching, Thomas Alsop, tips for making comics, workflow, working methods

Bonus Vid – Inking a page of Thomas Alsop

by Palle Schmidt 5 Comments

A timelipse vid of me “inking” a page of the upcoming book Thomas Alsop from BOOM! Studios.

Filed Under: Pro Tips, Video Tagged With: borders, Chris Miskiewicz, collaboration, creativity, how to, inking, making comics, Palle Schmidt, sketching, storytelling, Thomas Alsop, timelapse, video, workflow

Primary Sidebar

Hours of Premium Content

ComicsCrashCourse

Try the FREE 7-day Comics Course

Creator Profiles

Interviews with Creators

The CFB Podcasts

Find them here.

Comic Creators eBook

The Comic Creators eBook

Footer

Check out more resources

Bundles of quality content available, check how to write comics and how to make your comic book artwork look great or find tips and tricks on the blog.

Latest from the blog

  • Video: How to get Story Ideas
  • Video: The Benefit of Being a Nobody
  • Video: Why Creatives Hear Voices
  • Digital Tools for 2021
  • The Most Badass Tools for Inking Comics
  • Why Creative Restrictions are Good for You!
  • How to Write a Great Story – and Stick the Landing

Contact us

If you have questions or issues please contact us.

Official mail: mail(at)comicsforbeginners.com

Feel free to connect on Twitter and/or Facebook.

Copyright © 2023 · ComicsForBeginners by Palle Schmidt Log in